No Products in the Cart
Simplify installations with a multi-port midspan injector. Power up to four IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 24v UL approved power supply to provide direct voltage to your 24 Volt Passive PoE devices.
Compatible with 24 Volt Passive Mode B. This midspan meets the standard Mode B negotiation using pins 4,5 / 7,8 to deliver PoE power to your device.
Simple, Reliable, and Supported By Experts. We design our Power over Ethernet Injectors for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away. All of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.
|Data + PoE Ports||4|
|Dimensions||4 x 1.75 x 1 inches|
|Max Amps Per Kit||1 Amp|
|Max Power for Kit||30 Watts|
|Max. Amps Per Port||1|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||24 volts|
|PoE Mode/Pinout||Mode B (+4,5 -7,8)|
|Power Input||2.1 x 5.5 mm DC|
Does this provide lightning protection?
No, this device is not designed with surge protection.
Is this 30w per port or total of all 4
No, this is 30 watts to be divided amongst all ports in use on the injector. The WT-GPOE-4B is limited to 1 amp per port (or 24 watts per port). If you need 24 watts or less per port, we recommend our WT-GPOE-4B with WS-PS-24V120W.
I see the input voltage is 12-37V on the injector. Will this device run on a 12V battery instead of the power supply?