No Products in the Cart
Instantly upgrade your network switch to PoE. Power an IP camera, desktop phone, WiFi access point, or other low voltage 802.3af device through a network data cable using this Passive Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 48 volt DC power supply to power devices labeled “802.3af.”
|Certifications||CE, FCC, RoHS, UL (power supply)|
|Data + PoE Ports||1|
|Data Rate||10/100 Mbps|
|Dimensions||1 x 1 x 2 in.|
|Input voltage||48 Volts|
|Max Amps Per Kit||0.3 Amps|
|Max Power for Kit||15 Watts|
|Max. Amps Per Port||0.312|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||48 Volts|
|PoE Mode/Pinout||Mode B (+4,5 -7,8)|
|Power Input||2.1 x 5.5 mm DC|
|Power Supplies||PS-48v15w; 48 Volt, 15 Watt|
I want to remote view a camera on it's own network. If connect the POE-1-48V15W to a dedicated cable modem and the camera to the POE-1-48V15W will that work?
Yes, when the LAN port is taking data in from your modem/network source, this injector kit will allow you to see your camera view. Data on this is injector is not managed; data will be unmanaged / pass through transmission. Please note that this is a 10/100 injector. If your camera requries gigabit, please see our GPOE-1B-48v15w.
Hi, I am looking for a single to 4 port poe injector that I can use on my boat with a FLIR night vision camera. the issue is I need to connect the injector to a 12-24 vdc input source to power the injector. with this unit function with direct 12-24vdc without using the ac power adaptor?
This single port injector takes power from a DC power source (12-56 volts). If you already have a DC power source then yes, this injector will power on with 12-24VDC to convert the DC power to PoE power. Be sure to confirm the power requirements of your FLIR to ensure that it can accept PoE power.