First Column: This identifies the port numbers, including the two uplink ports 9 and 10
Second Column: The power status of the port. See guide to terms below.
Third Column: The entering data rate from the device used on the port (in Mbps)
Fourth Column: The exiting data rate from the device (in Mbps)
If the data rate turns red, then the port is exceeding its bandwidth settings.
PB: The maximum power available on the switch
TP: The current output power of the entire switch
PD: The number of powered devices connected to the switch
Norm: The switch configuration mode.
Options: (Norm - Normal switch; VLAN - All ports have their own VLAN; CCTV - CCTV camera set up. See section on Menu item 1 Switch Mode)