Simplify installations with a multi-port midspan injector. Power up to eight IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 24v, power supply to provide direct voltage to your devices like Mikrotik and select Ubiquiti models.
Compatible with 24 Volt Passive PoE on Mode B. This midspan meets the standard Mode B negotiation using pins 4,5 / 7,8 to deliver PoE power to your device.
Simple, Reliable, and Supported By Experts. We design our Power over Ethernet Injectors for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away. All of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.
|Data + PoE Ports||8|
|Dimensions||7.2 x 2.5 x 1 in.|
|Input voltage||24 Volts|
|Max Amps Per Kit||2.5 Amps|
|Max Power for Kit||60 Watts|
|Max. Amps Per Port||1 Amp|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||24 Volts|
|PoE Mode/Pinout||Mode B (+4,5 -7,8)|
|Power Input||2.1 x 5.5 mm DC|
I'm looking to use this with the ENS620EXT AP from Engenius. Their site says the APs use a "proprietary" 24-volt. Will this work?
Yes, this will work with your 24 volt mode B POE Device.
Hi there, What is the input voltage ?
The input voltage range for the GPOE-8B injector is 12-57V, but this injector kit listing includes a 24V power supply. The input voltage for the PS-24v60w is 100-240V AC with a frequency range of 50/60Hz.
hi there. I bought a WT-GPOE-8B 24V it doesn't work for my application. i am using it to supply up to 8 swann 836 Cams back to 7090 NVR. do i have the right product ?
Swann 836 is considered a 'non-poe' camera that is compatible with 12 Volts DC. For this you will need a 12volt splitter to supply DC power to your camera, I recommend WS-POE-12v10w, this splitter will complete your current set up and power your Swann 836 cameras from this powered injector. For questions on set up please feel free to call our helpful support staff at 512-479-0317