GPOES-8-7AB-48v60w

8 Port Gigabit PoE Switch With a 48 Volt 120 Watt Power Supply

Add 7 ports of PoE to your network. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. Or run two GPOES-8-7AB switches in a series to extend your data reach to more than 600 feet.

Passive PoE means versatility. A Passive PoE injector always delivers the same voltage as its power source. This switch comes with a 48 volt power supply to use with passive IEEE 802.3af PoE devices like IP cameras, IP Phones, WiFi Access Points and more.

Product Features:

Plug and Play - Unmanaged PoE switch with transparent VLAN throughput
Includes a 48 volt UL/CE/FCC approved power supply - 60 watts shared budget
Delivers passive "always on" power to the end device
Select Mode A, Mode B or Data only per port for compatibility options

Optional Accessories:

POES-RACK-MOUNT - 1U 19" Rack Mount fits two GPOES-8-7AB switches

$97.29 $138.99

Qty:

8 Port Gigabit PoE Switch With a 48 Volt 120 Watt Power Supply

Product Features:

Plug and Play - Unmanaged PoE switch with transparent VLAN throughput
Includes a 48 volt UL/CE/FCC approved power supply - 60 watts shared budget
Delivers passive "always on" power to the end device
Select Mode A, Mode B or Data only per port for compatibility options

Optional Accessories:

POES-RACK-MOUNT - 1U 19" Rack Mount fits two GPOES-8-7AB switches

Tech Info

Product Specifications

Certifications	UL/CE/FCC
Data + PoE Ports	7
Data Ports	1
Data Rate	Gigabit
Dimensions	7.5 x 3.25 x 1.25 inches
Input voltage	48 volts
Max Amps Per Kit	1.25 Amps
Max Power for Kit	60 Watts
Max. Amps Per Port	650 mA
Mount Type	Wall / Optional 1U Rack GPOES-RACK-MOUNT (Sold Separately)
Operating Humidity	5% to 90%
Operating Temperature Range	-10 - 60C
Output Voltage	48 volts
PoE Method	Passive
PoE Mode/Pinout	Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
Power Input	2.1 x 5.5 mm DC

Questions

Ask a Question

I have one of your 48v PoE switches. regarding 48v vs 24v. is the entire switch either / or for all ports? or will the switch step down voltage per device ? I'm thinking i'll need to get a 2nd 7 port unit to drive the 24v items.

is the entire switch either/or for all ports?
This is correct, there is no step down on the same unit for power, it is uniform across all the ports on the device.
That's correct you would need a second device to power the 24v.
Can I pass data without power?

Yes. If you have your data source connected to the uplink port on this GPOES-8-748v60w, data will still pass through if the POE on the port is turned off.