Expand your powered network with a single Ethernet cable. Rather than limiting your device options because of the cost of adding infrastructure, this high powered pass through PoE switch allows you to add devices and capacity anywhere on your network. Power up to four IEEE 802.3af standard IP cameras, desktop phone, WiFi access point, or other low voltage devices over 600 feet from PoE source. Use the Uplink port with 4-Pair PoE to extend power and data from your existing 802.3bt switch to support 4 802.3af (15 watt) devices in one unit.
Don't have IEEE 802.3bt? Not a problem. The GPOES-EX2005-60w-Kit comes with our passive 4 Pair PoE injector with up to 60 watts needed to utilize all 4 ports of the GPOES-EX2005.
|Adapters included||GPOE-1AB Passive Injector; 2.1 mm Y-Cable|
|Certifications||CE, FCC / Power Supply UL|
|Data + PoE Ports||4|
|DC connector||2.1mm x 5.5mm|
|Dimensions||With Mounting Brackets: 7.25 x 3.75 x 1.15|
|Input voltage||48 Volts PoE via uplink port|
|LEDs Per Port||2 - Connections and activity|
|Max Power for Kit||60 Watts total (15 watts per port)|
|Max. Amps Per Port||0.3125 mA|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 45C|
|PoE Method||IEEE 802.3bt/4PPoE (Uplink) / IEEE 802.3af LAN|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|PoE Standard||Injector: Passive 4 Pair PoE / Switch IEEE 802.3bt and IEEE 802.3af|
|Power Supplies||PS-48v60w; 48 Volt 60 Watt DC|
I have a situation where I need a PoE+ powered switch that will do pass thorough of PoE+ on minimum 2 ports. Theses are being used with Cisco 2960-X switches
This extender switch is powered with 60W PoE and has output power of 12W for 4 PDs, or 25W for 2 PDs. However, this product does not negotiate with the Layer 2 protocol that Cisco switches follow. Please feel free to contact our technical support team at 512-479-0317 for more information.