Instantly upgrade your network switch to PoE. Power up to eight IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Passive Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 24 volt DC power supply to power 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
|Data + PoE Ports||8|
|Input voltage||24 Volts|
|Max Amps Per Kit||2.5 Amps|
|Max Power for Kit||60 Watts|
|Max. Amps Per Port||1.25 Amps|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||24 volts|
|PoE Mode/Pinout||Mode B (+4,5 -7,8)|
|Power Input||2.1 x 5.5 mm DC|
Will this power a TP-Link EAP245 Wireless Access Point? https://www.tp-link.com/no/products/details/cat-5692_EAP245.html#overview
The TP-Link EAP245 requires IEEE802.3at PoE. This kit will not be enough POE voltage for your device and is a Passive injector. I recommend you look at our Active injector WT-AT-8-48V60W which meets the IEEE 802.3at PoE requirements.
Could I pair this with (8) WS-POE-USB to power arlo pro2 cameras?
Yes, this would work to provide power to Arlo Pro2 cameras. Since this POE-USB kit includes a 1.35-female USB adapter, you would need to use a USB (male) - microUSB to connect to the camera.
Will this power a Dahua SD50430U-HNI or do I need an active injector?
This product will not power your device. The datasheet for the Dahua SD50430U-HNI specifies the device as PoE+/802.3at compliant and requires 23 watts of power. We have found that most devices that follow the IEEE 802.3at standard, require active negotiation. In addition, you will need a DC power supply that is between 44-57 volts. I would suggest purchasing the WT-AT-8-56v120w for autonegotiation, and enough power to support up to 5 devices operating at max power consumption of 23watts.