PoE Tester and Detector Bundle
$42.74 $56.99
Inline PoE Voltage and Current Tester + Pocket-Sized PoE Detector
Two of our best-selling PoE tools for one low price. Keep the PoE Tester in your toolbox for when you need to check voltage, current, and power consumption on your Ethernet runs. The PoE Detector fits easily on your keychain and quickly lets you know if PoE is present, and if so, what type of PoE.
About the PoE Tester:
The PoE-Tester from PoE Texas belongs in every tool kit. Test PoE cameras, VOIP phones, and WiFi installations. When placed in-line between your PoE injector or switch and the powered device, the PoE-Tester will display the voltage available, current, and power consumption.
Features:
- Use this tool to troubleshoot PoE issues
- See how much power any PoE or DC powered device actually uses
- Measure available voltage at the remote end of a PoE connected device
- Observe line loss in Ethernet cable runs
- Use the 2.1mm DC connectors to measure voltage and current / power in 24, 48 and 56 volt installations
- Measure PoE currents up to 500 ma (28 watts) and DC current up to 5 amps
Specifications:
- Bright LED displays - alternate between Voltage, Current and Power
- Mode A display from 20v to 56 volts
- Mode B display from 20v to 56 volts
- DC input display from 5v to 56 volts
-
2.1mm to 2.1mm jumper included
About the PoE Detector
A must-have companion to our PoE Tester, the PoE Detector quickly indicates the type of PoE on a cable
Features:
- Detects and identifies IEEE 802.3af/at, 24 volt passive
- Compatible with reverse polarity Mode B for Cambium or Canopy.
- Ergonomic design fits comfortably between two fingers
- Easy-to-see LED display lights
- PoE powered, no batteries required
Product Specifications
| Adapters included | 2.1x5.5mm DC Cable |
| Cable connector length | 6 inches |
| Data Rate | Gigabit (Tester), N/A (Detector) |
| Dimensions | 4x4x2 in. (Tester), 2x1x0.75 in (Detector) |
| Input Voltage Range | RJ45: 20-56v / DC: 5-56v |
| Operating Humidity | 5% to 90% |
| Operating Temperature Range | -10 - 60C |
| PoE Method | Passive (Tester), Powered by PoE (Detector) |
| PoE Standard | 802.3af/at (Tester), IEEE 802.3af, at, 24 Volt Passive, 48/56 Volt Passive, Reverse Mode B (Detector) |
| Power Input | 2.1mm DC (Tester), Not Required (Detector) |
| Weight | 5oz (Tester), 1.5 oz (Detector) |
-
Will the detector test a standard ethernet port for signal?
Our PoE Detector will detect if there is 24-57 volts PoE available (active or passive PoE) . Our PoE Tester is used to detect PoE and function as an inline unit to provide wattage and amerage being used by the end device.
-
Will this device survive/diagnose 4-pair PoE, i.e. Ubiquiti AirFiber 24 or 11? Thanks - Wanting to send guys out with a $50 set of tools to save a $750-$3200 radio.
Yes, this tester will display readings in either Mode A or Mode B, depending on which pairs your device uses for power. Feel free to call our technical support team for more information: 512-479-0317.