Skip to content
PoE Texas Switch POES-8-7-48v60w

8 Port PoE Switch With 48 Volt 60 Watt Power Supply

SKU POES-8-7-48v60w
Sold out
$82.99

Notify me when back in stock

8 Port 10/100 PoE Switch With a 48 Volt 60 Watt Power Supply

Add 7 ports of PoE to your network. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. Or run two POES-8-7 switches in a series to extend your data reach to more than 600 feet.

Passive PoE means versatility. A Passive PoE injector always delivers the same voltage as its power source. This switch comes with a 48 volt power supply to use with 48-volt Passive PoE devices and 802.3af devices.

Product Features:

  • Plug and Play - Unmanaged PoE switch with transparent VLAN throughput
  • Includes a 48 volt UL/CE/FCC approved power supply - 60 watts shared budget
  • Delivers passive "always on" power to the end device
  • Compatible with IP Phones, PoE Cameras, WiFi Access Points and more
  • Select Mode A or Mode B input for compatibility options
  • 10/100 Mbps data speed

Optional Accessories:

Product Specifications

Certifications UL/CE/FCC
Data + PoE Ports 7
Data Ports 1
Data Rate 10/100
Dimensions 7.5 x 3.25 x 1.25 inches
Input voltage 48 Volts
Max Power for Kit 60 Watts
Max. Amps Per Port 650 mA
Mount Type Wall / Optional 1U Rack POES-RACK-MOUNT (sold separately)
Operating Humidity 5% to 90%
Operating Temperature Range -10 - 60C
Output Voltage 48 volts
PoE Method Passive
PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
Power Input 2.1 x 5.5 mm DC
Power Supplies PS-48v60w; 48 Volt, 1.25 Amp, 60 Watt

QUESTIONS & ANSWERS

Ask a Question

  • Is this switch VLAN compatible?

    Yes, this POE switch is designed for Transparent VLAN pass through. 

  • I am using this switch to power UniFi G3 cameras. Some are passive 24 that I am using 802.3af adapters. Others are standard 802.3af. The power supply I originally received was 24 volt and it was not sufficient. I tried ordering a 48 volt but must have ordered the wrong one and I’ll need to exchange it. Would you please tell me which power supply I need for this switch to run 5 cameras and a cloud key gen 2 plus. Thanks

    Thank you for reaching out to us today. We will follow up with you through email in the next few minutes to assist you in this setup.

×





×

×

Error