GPOE-2B

$6.29 $8.99

Product Specifications

Data + PoE Ports 1
Data Ports 1
Data Rate Gigabit
Dimensions 1 x 1 x 2 in.
Input Voltage Range 12 - 56v DC
Max. Amps Per Port 650 mA
Mount Type Wall
Operating Humidity 5% to 90%
PoE Method Passive
PoE Mode/Pinout Mode B (+4,5 -7,8)
Power Input 2.1 x 5.5 mm DC
Power Supplies None
Weight 1 oz
  • How do you filter out power from data at the receiving end?

    As long as you're power is on the Mode B pins (4,5 and 7,8), simply plug the PoE cable into the PoE port. The LED light will come on and the DC barrel will have the power. The Mode A pins (1,2 and 3,6) will pass through unchanged, so if you have power on them, they will still have power. If you need to filter out power on both Mode A and B pins, we recommend out WT-GPOE-1-AB.

  • This says it\'s mode b, but just 2 pairs carry power. Isn\'t this a mode a device?

    Gigabit data requires all 4 pairs. Power can be supplied on either Mode A or Mode B sets of pairs using a coupling transformer. This device has the coupling transformer on the mode B pairs. We have Mode A devices too, but this one is a mode B. For example, all Mikrotik and UBNT gigabit devices require mode B. All other devices that support gigabit Ethernet that we have seen accept either mode A or mode B power. So this device is gigabit and is mode B - the two are not conflict

  • Can I input a lower DC voltage? My device is very voltage sensitive (not strictly PoE complaint) and I want to drive the PoE with 6 volts.

    No, this injector is not compatible with an input of 6 volts. The input power range for the GPOE-2B is 12-57 volts.

x