Power Over Ethernet (PoE) HAT for Raspberry Pi 3 B+ 4 and 802.3af PoE Network
$25.99
Product Specifications
| Certifications | CE, FCC, RoHS |
| Connector Types | Two 4 pin x 1 mm |
| Data Rate | 10/100/1000 |
| Dimensions | 2 5/8" x 1 1/2" x 7/10" |
| Efficiency | 90% |
| Max Current | 2500 mA |
| Mount Type | Board Mounted |
| Operating Humidity | 10-90% non condensing |
| Operating Temperature Range | 0 - 40C |
| Output Voltage | 5 volt |
| PoE Mode/Pinout | Mode A |
| PoE Standard | IEEE 802.3af |
| Weight | 1 oz |
-
48V at 270ma is indeed 12.9 watts (input). However you need to output at 5V you must output higher current 2,500mA is minimum recommended by R-Pi. Yes?
When using the GAF-PiHAT to power the R-Pi with PoE (48v), this allows for an output of 5 volts at 12 watts.I've linked the technical center page for this product below. It goes into a little bit more detail about the power requirements and output. -
How does 270mA fit with 5V and 12.9W specified elsewhere? I guess a Pi does not work with only 270mA.
Using our GAF-PiHAT to power the R-Pi with PoE (48V), the max current of 2500mA allows for an output of 5 volts at 12 watts.
-
What is the max current on 5V ?
The maximum current available from the GAF-PiHAT is 2500mA.
-
What is the max current on 5V ?
The maximum current available fromthe GAF-PiHAT is 2500mA.
