No Products in the Cart
Four PoE+ Ports on One Network Cable Run. Power up to four IEEE 802.3af or two 802.3at IP phones, WiFi access points, or other low voltage devices over 600 feet from the PoE source. Power this switch via the uplink port with your existing 802.3bt switch or a 55-volt, 60-watt power supply like our BT-1-55v60w-IN midspan injector.
In-Wall Pass Through PoE Switch Opens Opportunities. Rather than limiting your device options because of the cost of adding infrastructure, this high powered pass through in-wall PoE switch allows you to add devices and capacity anywhere on your network. Install in a remote office, a dorm room, a hotel room, use with a collection of cameras or wherever you need a little extra power and network capacity. Install this switch into a standard electrical receptacle for a complete integration into your home or office.
|Certifications||CE, FCC, RoHS|
|Data + PoE Ports||4|
|Dimensions||4.5 x 2.75 x 3.5 Inches; Fits in a US Single Gang Box|
|Display Type||Blue LED Status Indicator|
|Input Voltage Range||44-56 volts through Uplink Port|
|LEDs Per Port||2 - Connections and activity|
|Max Power for Kit||60 watts total|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 45C|
|PoE Method||IEEE 802.3bt/4PPoE (Uplink) / IEEE 802.3af LAN|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)|
|PoE Standard||Injector: Passive 4 Pair PoE / Switch IEEE 802.3bt and IEEE 802.3af|
|PoE Standards Supported||Single Signature IEEE 802.3bt Type 4|
Can this be powered by 802.3at if the anticipated load at the switch is less than 20 watts?
Yes, this can be powered with 802.3at POE, which would have a power budget of 25.5 W.
Would it affect non Poe devices to use this?( Tv, game console,, ect..)
Great question! The GBT-4-IW is active, or auto-negotiating. Power is only added to the data cable (output) when an 802.3af or 802.3at device is connected.
Is this a switch or a splitter, will it work like any other unmanaged Layer 2 switch?
The GBT-4-IW is an unmanaged POE switch. It takes in 802.3bt or 4PPoE on the uplink port and allows you to power up to four IEEE 802.3af or two IEEE 802.3at devices.
Can you disable the POE so it's just data coming through?
The GBT-4-IW is not a managed splitter. Disabling of power or data will need to be managed through your PoE switch or injector.