PoE Texas Injector GPOE-12AB-48V60W
PoE Texas Injector GPOE-12AB-48V60W
PoE Texas Injector GPOE-12AB-48V60W
PoE Texas Injector GPOE-12AB-48V60W
Sold Out
  • SKU: GPOE-12AB-48v60w

12 Port Gigabit PoE Injector, Mode A/B, Rack Mount with 48V 60W Power Supply

Shipping calculated at checkout.

Simplify installations with a multi-port midspan injector. Power up to twelve IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This kit includes a 48 volt, 60 watt power supply to use with IEEE 802.3af PoE devices.

Save big on network upgrades and device installations. Power over Ethernet delivers power 328 feet from the PoE Injector, eliminating the expense and hassle of installing AC power near your powered device.

Product Features

  • Power up to 12 PoE devices in one unit - extend power up to 328 feet
  • Passive "Always On" power will continuously deliver power to your device
  • Includes a UL Rated 48 volt, 60 watt power supply
  • Compatible with Passive 802.3af PoE devices
  • Mode A/B power input options allows for versatile PoE applications
  • Input 48 Volts
  • .65A Port Limit - up to 31 watts per port with total budget of 60 watts available for all ports
  • 10/100/1000 Mbps data operation
  • Quality shielded RJ45 ports
  • Bright LED status indicators
  • 1U Rack Mount
See the Online Technical Manual

    Compatible Devices

    • IP phones like Polycom, Cisco, Yealink
    • WiFi Access points
    • IP Cameras
    • 802.3af devices
    • NOTE: All devices receive the same voltage (48 volts) and share power up to 60 watts. Check your device specifications for power needs

    Product Specifications

    Certifications UL/CE/FCC
    Data + PoE Ports 12
    Data Ports 12
    Data Rate Gigabit
    Dimensions 19 x 2 x 1.75 in.
    LEDs Per Port 1
    Max Amps Per Kit 1.25 Amps
    Max Power for Kit 60 Watts
    Max. Amps Per Port 650 mA
    Mount Type Rack
    Operating Humidity 5% to 90%
    Operating Temperature Range 0-65C
    Output Voltage 48 volts
    PoE Method Passive
    PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
    PoE Standard 802.3af
    Power Input 2.1mm DC x2
    Power Supplies PS-48v60w


    Ask a Question
    • I have 6 to 8 units of Ubiquiti UniFi UAC-LR. I bought WS-GPOE-12-48V60W, can I use this in Mode B for my devices?

      The Unifi UAC-LR are specified to take power under 802.3af/A OR 24 volt Passive POE standards. Because the WS-GPOE-12-48v60w injector comes with a 48 volt power supply, I would recommend using Mode A to deliver power on pins 1,2,3 & 6 to your devices.

    • I'm looking to power a UBNT UAC-LR (24V) as well as 8 UVC-G3s (24V). However, I want to make sure if I ever upgrade the access point to a UAC-PRO, I will not need to change out the PoE Injector. Given I need to mix 24V and 48V (for the Pro) - is the WS-GPOE-12-48V60 safe for use now and in mixed mode in the future?

      This GPOE-12-48v60w is passive, so power (48V in this listing) is always on. We do not recommend connecting 24 volt devices to this injector kit without a step down converter. If you want to mix 802.3af, and 24V devices on this injector, we recommend using the GAT-24v25w for your 24 volt PoE devices. Please note that for the UAP AC LR, if it has a date code of 1638 or higher, it is compatible with 802.3af PoE.