PoE Texas Injector 16 Port Gigabit Mode A Rack Mount PoE Injector with 48 Volt 240 Watt Power Budget
  • SKU: GPOE-16A-48v240w

16 Port Gigabit Mode A Rack Mount PoE Injector with 48 Volt 240 Watt Power Budget


Simplify installations with a multi-port midspan injector. Power up to sixteen IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This kit includes two 48 volt 120 watt DC power supplies for use with 802.3af PoE devices.

Compatible with IEEE 802.3af with Mode A Negotiation. This midspan meets the IEEE standard negotiation using pins 1,2 / 3,6 to deliver PoE power to your device.

Product Features

  • Power up to 16 PoE devices in one unit - extend power up to 328 feet
  • Passive "Always On" power will continuously deliver power to your device
  • Compatible with Passive 802.3af/at PoE devices
  • Mode A negotiation on pins 1,2- / 3,6+
  • Includes two UL certified 48 volt, 120 watt power supplies for 240 watts total budget
  • .65A Port Limit
  • 10/100/1000 Mbps data operation
  • Dual 2.1mm standard DC inputs
  • Quality shielded RJ45 ports
  • Bright LED status indicators
  • 1U Rack Mount
See the Online Technical Manual

    Compatible Devices

    • IP phones like Polycom, Cisco, Yealink
    • WiFi Access points
    • IP Cameras
    • 802.3af devices
    • NOTE: All devices receive the same voltage and share power. Check your device specifications for power needs

    Product Specifications

    Certifications UL/CE/FCC
    Data + PoE Ports 16
    Data Ports 16
    Data Rate Gigabit
    Dimensions 19 x 2 x 1.75 in.
    Max Amps Per Kit 2.5 Amps
    Max Power for Kit 240 Watts
    Max. Amps Per Port 650 mA
    Mount Type Rack
    Operating Humidity 5% to 90%
    Operating Temperature Range -10 - 60C
    Output Voltage 48 volts
    PoE Method Passive
    PoE Mode/Pinout Mode A (-1,2 +3,6)
    Power Input 2.1mm DC x2
    Power Supplies PS-48v120w x 2


    Ask a Question
    • will this injector supply 30 watts on a port? thx

      Yes. With a 48 volt power supply, you can get 30 watts out of a single POE port on this injector. Each port has a fuse limit of .650mA. One thing to be mindful of is the overall power budget of 240 watts.

    • What is the green/amber LED status on the 16 port rackmount injector's?

      The green LED light indicates power is being provided through that port.  The amber LED indicates data. Both LEDs should be lit when connected to a power and data source.