No Products in the Cart
Simplify installations with a multi-port midspan injector. Power up to four IP cameras, desktop phones, WiFi access points, or other low voltage devices through a network data cable using this Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. This injector comes with a 48v UL approved power supply to provide direct voltage to your IEEE 802.3af/at device.
Compatible with IEEE 802.3af with Mode A Negotiation. This midspan meets the IEEE standard negotiation using pins 1,2 / 3,6 to deliver PoE power to your device.
Simple, Reliable, and Supported By Experts. We design our Power over Ethernet Injectors for simple installation and long life, but sometimes things go wrong. When that happens, expert help is only a phone call away. All of our PoE products are backed with a 1-year replacement warranty and 30-day “no questions asked” return policy.
|Data + PoE Ports||4|
|Dimensions||4 x 1.75 x 1 in.|
|LEDs Per Port||1|
|Max Amps Per Kit||1 Amp|
|Max Power for Kit||48 Watts|
|Max. Amps Per Port||0.65|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||48 volts|
|PoE Mode/Pinout||Mode A (-1,2 +3,6)|
|Power Input||2.1mm DC|
Hi, Do you you have any MODE B Passive POE injectors? (multiport if possible to power several devices)
Can I use this in a configuration with one incoming LAN to split to 2 powered outgoing 802.3af cat 5 cables?
This product is a passive midspan PoE injector. It will require one line of data into each LAN port to provide data on the corresponding PoE out port. If you are looking to only use one data line in and get PoE out of all ports, please see our PoE switches. As always, feel free to contact our tech support at 512-479-0317 for your specific run.
I have the WT-GPOE-4-48V48W. On the product specs here, it says a max of 1.25A per port, but on the device itself, it says 650mA per port. Which is correct? Thanks.
Thank you for bringing this to our attention. The 1.25A is the maximum power supply output. The limit per port is 0.65A / port.
¿este dispositivo puede alimentar a 4 equipos ubiquiti PBE-M5-400 sin problemas?
No, para el pago de Ubiquity PBE M5-400 o la versión WT-GPOE-4-B-24V30W de 4 Puertos, esto alimentará sus 4 unidades.
I have a WT-GPOE-4-48v48w that has stopped working...no active LED on power supply or injector. Is there a fuse inside or something else that might have tripped?
This injector does have fuses inside, and each port has a fuse limit of .65A. Our support team will send you an email to find out more about your application.
I have your POE injector WT-GPOE-4-48V48W at home. I need to be able to connect two non-POE cameras. Both are 5V 1.3A and use a 2.1mmx5.5mm plug. What should I order? At work I am using a Juniper EX2200-C POE+ and want to be able to run a Raspberry Pi 3B+. What POE splitter would you recommend for my use at work?