Skip to content

8 Port Gigabit PoE Switch with 24 Volt 60 Watt Power Supply

SKU GPOES-8-7AB-24v60w
Sold out

Add 7 ports of PoE to your network. Run a single Ethernet cable up to 328 feet (100 meters) from your existing modem or router and connect to the switch to provide power and data to as many as 7 devices. Or run two GPOES-8-7AB switches in a series to extend your data reach to more than 600 feet.

Passive PoE means versatility. A Passive PoE injector always delivers the same voltage as its power source. This switch comes with a 24 volt power supply to use with 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.

Product Features:

  • Plug and Play - Unmanaged PoE switch with transparent VLAN throughput
  • Includes a 24 volt UL/CE/FCC approved power supply - 60 watts shared budget
  • Delivers passive "always on" power to the end device
  • Select Mode A, Mode B or Data only per port for compatibility options

Optional Accessories:

Product Specifications

Certifications UL/CE/FCC
Data + PoE Ports 7
Data Ports 1
Data Rate Gigabit
Dimensions 7.5 x 3.25 x 1.25 inches
Input voltage 24 Volts
Max Amps Per Kit 2.5 Amps
Max Power for Kit 60 Watts
Max. Amps Per Port 650 mA
Mount Type Wall / Optional 1U Rack POES-RACK-MOUNT (sold separately)
Operating Humidity 5% to 90%
Operating Temperature Range -10 - 60C
Output Voltage 24 Volts
PoE Method Passive
PoE Mode/Pinout Mode A (-1,2 +3,6)/Mode B (+4,5 -7,8)
Power Input 2.1 x 5.5 mm DC


Ask a Question
  • What are the following for the WS-GPOES-8-7-24v60w? 1. Non-blocking throughput 2. Switching capacity 3. Forwarding rate

    The WS-GPOES-8-7 will only put power on 1 mode (mode A OR mode B) at a time. You could use one WS-GPOES-8-7 to power another through the uplink port, the mode for power will be determined by the main power sourcing equipment. This switch will provide 1000 mbps from a 1000mbps source, and is completely passive for data.

  • What happens if a device that does not require POE connects to one of the ports? For example, it will be a laptop or PLC

    To avoid sending power to a laptop or PC or other network device, we recommend that you turn the power off to that PoE port manually on the back of the switch.

  • How do I switch the unit to Mode from mode A 24 volt to mode A 48 volt?

    The switch WS-GPOES-8-7 can only support (1) power input into the device (mode a or b). We offer step up converters if you are ading 48 volt devices onto your 24 volt system. Please see our WS-POE-48V10W unit. If you are upgrading all of your powered devices to 48volt/ 802.3af units, you could replace the power adapter with WS-PS-48V60W or WS-PS-48V120W.