Instantly upgrade your network switch to PoE. Power up to eight IP camera, VOIP phones, WiFi access points, or other low voltage devices through a network data cable using this Passive Power over Ethernet (PoE) injector. A Passive PoE injector always delivers the same voltage as its power source. Pair this injector with a 48 volt DC power supply to power devices labeled “802.3af,” or you can use a 24 volt DC power supply to power 24-volt passive PoE devices like Access Points from Mikrotik, Ubiquiti, and many more.
|Data + PoE Ports||8|
|Input Voltage Range||12 - 56v DC|
|LEDs Per Port||1|
|Max. Amps Per Port||1.25 Amps|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||0-65C|
|PoE Mode/Pinout||Mode B (+4,5 -7,8)|
|Power Input||2.1 x 5.5 mm DC|
What is the maximum power supply current that this can safely handle? To power all 8 ports for 802.3at would require 240 watts or 5 amps of 48v.
This will handle 240 watts, but we have other products for 802.3at. See the WS-GPOE-AB-6 or WS-GPOE-12, since in many cases, people with 802.3at also want gigabit data rates.
Why is this 10/100 and not gigabit if it\'s just supplying power?
Gigabit Ethernet needs all 8 wires / 4 pairs to be used for data. Additional electronics are needed for power and data to share the same pairs.
In 10/100, data and power do not use the same wires For Gigabit, see the model WT-GPOE-8 .
Can I Supply this with 24V?
What does the green light mean when it is on solid and what does it mean when flashing.
A green solid LED is indicating that the injector is receiving power. A flashing LED indicates a power draw over the port limit of the inejctor. Please feel free to email our technical support team firstname.lastname@example.org. We are happy to help trouble shoot as needed. Thank you!
Will this injector work at 10/100 with LAN side connected to gigabit switch and PoE side connected to 10/100 device?
Yes. This injector can only support up to 10/100 mbps, even if it is used with a gigabit switch.