Mix and Match PoE versions on one PoE injector. Caught between Ubiquiti Versions or own Legacy PoE devices? The GPOE-48v10w can be used to power 802.3af devices from a 12 volt to 30 volt injector or DC input. Input power on to the DC or the RJ45 dongles and you will instantly get 48v PoE on the output. This device works inline for simple, convenient application.
Product Use Scenarios:
|Certifications||CE, FCC, RoHS|
|Connector Types||DC Barrel / RJ-45|
|DC connector||5.5 x 2.1 mm DC|
|Input Voltage Range||12 to 30 volts DC and PoE|
|Max Power for Kit||10 watts|
|Max. Amps Per Port||200 mA output|
|Operating Humidity||5% to 90%|
|Operating Temperature Range||-10 - 60C|
|Output Voltage||48 volts|
|PoE Mode/Pinout||Input: Mode B (+4,5 -7,8) / Output: Mode A (-1,2 +3,6)|
|Power Input||2.1 mm DC in / RJ-45 In|
What is the polarity of the DC power in barrel plug ? [ o +ve ]-ve. ? Is the inside pin positive or negative.
Our DC barrel plugs are center positive. The center (tip) of the output plug is positive (+) and the barrel of the output plug is negative (-).
Just to clarify... The 24 volt Passive PoE source powers this device? No external Power supply is required? If so, why would you need the 2.1mm x 5.5mm DC female power input for 12 volts to 30 volts?
The Male RJ45should be plugged into a PoE port on your Power Sourcing Equipment which has an output of 24 volts. The WT-GPOE-48V10W will then step up the voltage to 48 volts, and you can run your CAt6e- cable from the Female RJ45 port out to your 802.3af device. The 2.1 x 5.5mm barrel is there if you wanted to power it directly using a 10-30volt power supply, using the WT-GPOE-48V10W to function as the splitter and the step up converter.